Easily add a network interface to your computer via USB. Common uses are for improved speeds vs. 10/100 adapters and wireless networks, for replacing a broken internal network card, for adding a separately routable network interface, and for peer-peer file transfer over Ethernet. It is not a solution for connecting a USB device to a network. PerformancePlug into any USB 2.0 laptop or desktop currently limited to 10/100 ethernet, and benefit from faster transfers on your Gigabit Ethernet Network. USB 2.0 supports theoretical speeds up to 480Mbs. In practice, most machines will see up to a doubling of network speed by moving from 100Mbs Fast Ethernet to 1000Mbs Gigabit ethernet via USB. Also works on 10/100 ethernet networks at their native speeds. DriversMicrosoft signed 32/64-bit drivers for Windows 7, Vista, XP, 2000, ME, and Win98SE. Mac OS X support limited to 32-bit kernels and users of Mac OS 10.6 and later must download the latest driver from plugable.com. Driver for Linux kernels 2.6.9+ (advanced users only: must download source from ASIX and build as a kernel module). Not compatible with Tivo Series 2, Wii, or most other non-PC devices. Included in PackageUSB 2.0 to Gigabit Ethernet Adapter with standard make USB type A connector to PC and female RJ45 jack to network, Quick Install Guide, and Driver Disk for Windows, earlier Mac versions, and Linux.
Price : £24.00
This front bezel plate is screwed on the front of a networking socket. It will accept any standard cat5 connection cable. Package contains one face bezel with twin cat5 sockets(including modules), mounting screws & wiring instruction sheet.
Price : £2.04
Splits one Ethernet female port into two female ports. This splitter adapter will allow you to use two Ethernet devices in one spare RJ45 wall socket female port, by splitting this port into 2. Attach two computers to an existing CAT5E Structured cabling system. Use one CAT5E UTP Cable Economiser to allow two devices to be plugged into a single 8-core (4-pair) CAT5E UTP faceplate. Then use one at the other end of the cable run to split the signal to two ports in the hub or patch panel. Two CAT5E cable economisers are required, one connected to a Patch Panel and another one attached to the network wall box outlet. The Cat5e Economiser, must used in pairs (one at at each end of a cable run), allows 4 pair cable to be divided in two separate twisted pair data signal sockets. By plugging one economiser direct into a wall outlet and another into a patch panel at the other end; one cable run of 4 twisted pair can be used to transmit 2 sets of data signals. Cat5e only utilises 2 of the four pairs of wires (wires 1,2,3,6) inside the cable. These splitters allow data from one connection to be sent down the usual wires 1,2,3,6 and the data from the second connection to be sent down the other cables (wires 4,5,7,8). These can be used with both Straight cable and Crossover Cable connections. When the signal reaches the other end, it must be split again back into 2 separate cables. This is why they are used in pairs. These are intended for Data transmission and not for Voice. They are not suitable for telephones or for sharing a Broadband connection. Also known as RJ45 Cable Economisers / Splitters / passive Hubs / T-Pieces / Mod T-Adapters / Modular Jack Splitters.[PLEASE NOTE- You CANNOT share a broadband connection with this device. This will NOT split a port on an ethernet card, XBox or NTL Box. They are ONLY for use with patch panels & face plates.]
Price : £7.49
TPLink 5Port Gigabit Switch Desktop TLSG1005D TP LINK
Price : £14.89
This front bezel plate is screwed on the front of a networking socket. It will accept any standard cat5 connection cable.Package contains one face bezel with single cat5 socket(including module) and space for one additional socket, mounting screws & wiring instruction manual.
Price : £1.80
This 5-port 10/100Mbps switch will allow you to quickly add up to five computers, workstations, and other Ethernet devices to your Ethernet network. It is ideal for small businesses and home networks. This switch is a Plug & Play installation and no configuration is necessary.All 5 ports support automatic MDI/ MDI-X crossover detection. Auto MDI/MDIX ports on newer hubs or switches makes it simple to connect to the switch, just plug either a Crossover or Straight Through CAT5 cable into any port.
Price : £18.99
High Quality Shielded (Foiled) Data Network Patch Lead. Rated at Cat6 Gigabit speed.
Price : £2.35
High Quality Shielded (Foiled) Data Network Patch Lead. Rated at Cat6 Gigabit speed.
Price : £1.90
* For testing LAN (Local Area Networks)
* Can be used on RJ11, RJ12, 10 Base T and token ring cables
* Slow and fast switch and LED indicator shows malfunctions
Price : £5.39
